Ultimate 6 Steps To Clean Your Guns With Wd40 Today

Proper maintenance and cleaning of firearms are essential for their longevity and safe operation. One common household item that can be used for this purpose is WD-40, a versatile product known for its lubricating, cleaning, and protective properties. In this guide, we will walk you through the ultimate 6-step process to clean your guns effectively using WD-40.

Step 1: Safety First

Before beginning the cleaning process, ensure that your firearm is unloaded and safe to handle. Always follow these safety precautions:

• Check the chamber and magazine to confirm that there is no ammunition present.
• Point the firearm in a safe direction, away from yourself and others.
• If you are unsure about the condition of your firearm, consult a professional gunsmith.

Step 2: Gather the Necessary Tools

To clean your gun effectively, you will need the following tools and supplies:

• WD-40 Multi-Use Product
• Gun cleaning rod or brush
• Bore snake or cleaning patches
• Gun oil or lubricant
• Gun cleaning solvent
• Clean, soft cloths
• Eye protection and gloves (optional but recommended)

Step 3: Disassemble the Gun

Depending on the type of firearm you have, you may need to disassemble certain parts to access all the areas that require cleaning. Refer to your firearm’s manual or consult a professional if you are unsure about the disassembly process.

Typically, you will need to remove the magazine, slide or bolt, and any other removable parts. Be sure to lay out the disassembled parts in a safe and organized manner to avoid losing any small components.

Step 4: Apply WD-40 and Clean

WD-40 is a versatile product that can be used for both cleaning and lubricating your firearm. Here’s how to use it effectively:

1. Spray a small amount of WD-40 onto a clean cloth or directly onto the gun’s surfaces.
2. Use the cloth to wipe down the exterior of the firearm, paying close attention to areas prone to rust or corrosion.
3. For the internal components, such as the barrel and action, use a cleaning rod or brush to apply WD-40. Be sure to follow the manufacturer’s instructions for proper cleaning rod usage.
4. Run a bore snake or cleaning patch through the barrel to remove any residue or debris. Repeat this step until the patch comes out clean.

Step 5: Lubricate and Reassemble

After cleaning with WD-40, it’s important to lubricate your firearm to ensure smooth operation and prevent rust. Here’s how to do it:

1. Apply a small amount of gun oil or lubricant to the appropriate parts of your firearm, such as the slide, bolt, and action.
2. Use a clean cloth to wipe away any excess lubricant to avoid attracting dust and debris.
3. Reassemble your firearm, following the disassembly instructions in reverse order. Make sure all parts are securely in place.

Step 6: Final Inspection and Test Firing

Once you have cleaned, lubricated, and reassembled your firearm, it’s important to conduct a final inspection and test firing to ensure everything is functioning properly.

1. Visually inspect the firearm for any signs of damage, wear, or improper reassembly.
2. Load the firearm with the appropriate ammunition and perform a test firing in a safe and controlled environment.
3. Pay attention to the firearm’s performance, such as ease of operation, accuracy, and overall functionality.

Regular maintenance and cleaning of your firearms are crucial for their performance and safety. By following these 6 steps and using WD-40 as a trusted cleaning and lubricating product, you can keep your guns in optimal condition.

FAQs